Socket Mobile 7 Manual do Utilizador descarregar pdf (Página 17)

STEP 6: Connect Scanner to Pocket PC via Bluetooth

1. Turn on the Cordless Hand Scanner. Press the small

power button for five seconds, until you see the LED

turn blue. The LED should blink blue once every second

to show that the Bluetooth radio is on but not connected.

If the LED begins blinking red, the battery needs to be

recharged.

2. Prepare the Bluetooth hardware for your Pocket PC. Make sure the

Bluetooth radio is turned on. If needed, make sure a COM port is

enabled for outbound Bluetooth Serial communications, and note

the COM port number. Refer to the documentation for your Bluetooth

hardware for instructions.

Socket SDIO or CF Connection Kit:

• Insert the Socket SDIO or CF Bluetooth card into your Pocket PC.

• Make sure a Bluetooth COM port is enabled. Tap Bluetooth icon |

Advanced Features | My Bluetooth Device | COM Ports tab. Make sure

the box Bluetooth COM Port is checked.

• If the COM port cannot be enabled, you need to disable the IrDA

port first. Tap Start | Settings | System | IrDA. Follow the instructions

to disable the IrDA port, then repeat the instructions above to enable

the Bluetooth COM port.

CHAPTER 2: SETUP FOR WINDOWS MOBILE 17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 77 78

Sem comentários

Socket Mobile 7 Manual do Utilizador Página 17