Socket-mobile Bluetooth iPAQ Manual do Utilizador descarregar pdf (Página 27)

CHAPTER 3: SETUP FOR WINDOWS XP, VISTA, AND 7 27

SCENARIO 3:

1. Find out the Bluetooth address of your computer.

• Your Bluetooth configuration utility should report the address.

• If you are using an add-on Bluetooth card or adapter, it may be

labeled on the device.

2. Use barcode software or a barcode generating website like

http://www.idautomation.com/java/linearservlet.html

http://www.barcoding.com/upc

to print the following barcode:

IMPORTANT! FORMAT THE BARCODE IN THE SYMBOLOGY

CODE 128!

ActivePairing Barcode Sample Result after Scanning

Initiator Bar Code —

contains the following data:

#FNIxxxxxxxxxxxx#

where xxxxxxxxxxxx is

the Bluetooth address of

the computer

The scanner will

change to initiator

mode and

automatically try to

connect to the

computer with the

Bluetooth address

embedded in the

barcode

3. Check the SocketScan task tray icon to make sure the computer is ready for

ActivePairing. There should be an animated “spinning” icon that alternates between a

ring icon and a handheld scanner icon.

4. Scan the Initiator Barcode. Press the large trigger button.

Note: The scanner will try to connect every 2 seconds for a maximum of 20 attempts.

5. After connecting, the scanner will beep once, and the Bluetooth Status LED of the

wrist unit will blink once every 3 seconds. The SocketScan icon will also change to a

static ring icon.

Note: After disconnecting from a computer (by turning of the scanner), you can easily

connect to a different computer by scanning the Initiator Barcode customized for that

computer. The computer’s Bluetooth radio must be on, and SocketScan must be open.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 113 114

Sem comentários

Socket-mobile Bluetooth iPAQ Manual do Utilizador Página 27